Road Construction Materials

ideal for the repair of road surfaces

BORNIT® Hot Compound Primer

  • short info
  • detailed information
  • Downloads
  • Reference

short info

BORNIT® Hot Compound Primer
Polymer adhesive priming substrate in road and bridge construction for hot compound filler and weld-on tapes, brush-on and spray-on, quick drying, tested compliant with ZtV fug-StB and SNV, contains solvent.

Color: transparent

ean-codearticle-No.package 
4 017228 007007
4 017228 007168
6800000431
6800000429
10 liter
25 liter
30 cans
12 cans
consumption
approximately 0.2 liters / m² depending on surface
tests / CE declaration of performance
BORNIT®-Haftgrund
















detailed information

Description:
BORNIT® Hot Compound Primer is a fast drying bonding primer, which contains solvents and polymer plastic.  It is applied cold by brush or spraying.
Quality as per TL bit Fug 82 and ZTV Fug Stb 01.

Uses:
It is used to improve the gripping properties of BORNIT® SNV 164 hot sealing compound, BORNIT® TL hot sealing compound and BORNIT® Rail-Sealing Compound. The product is also used to prime the internal edges of joints.

Advantages:
ease of use as set ready
universal use so many possible applications
good adhesion
quick drying, solvent based
economically and to reduce costs because less equipment, materials and labor

Technical Data:
Type bonding primer
Base polymer bonding bridge
Density at +20°C 0.82 g/ cm³
Consistency for brush or spray application
Application large and small brush, sprayer
Solid particles about 40%
Drying time < 30 minutes
Storage protect from direct sunlight and from the affects of heat
Storage period at least 6 months in the original, closed containers. Protect from combustion!
Cleaning oluene
According to Industrial Safety Ordinance  

Application:
The surface must be clean, dry and free of grease. The primer is to process at normal temperature by brushing or spraying. The processing temperature (ambient and substrate temperature) should not fall below +5 ° C and above +35 ° C.

Consumption:
According to the roughness of the base: 0.2 l/m².

Storage:
The storage period in the original, closed containers is at least 6 months.  The product must be protected from direct sunlight and the affects of heat.

Health protection during work and fire protection:
Keep out of the reach of children. Do not eat, drink or smoke while working. When working ensure that there is sufficient ventilation! Pay Attention to the actual version of TRGS. Do not use in enclosed areas! Only in liquid state flammable and dangerous to the environment. Keep away from fire. After evaporation of the solvent, there is no more danger for the environment. The bitumen-film is not hazardous for human, as well as the environment. For further information please refer to Material Safety Data Sheet.

R-phrases:
R 11 Highly flammable
R 51/53 Toxic to aquatic organisms, may cause long-term adverse effects.
R 65 Harmful: may cause lung damage ver-causes.
R 66 Repeated exposure may cause skin dryness or cracking.
R 67 Vapours may cause drowsiness and dizziness.

S-phrases:
S 2 Keep out of the reach of children
S 3/7/9 Keep container you store in a cool, well-ventilated place
S 16 Keep away from sources of ignition. Do not smoke!
S 23 Do not inhale fumes.
S 29 Do not empty into drains.
S 51 Use only in well-ventilated areas.
S 57 Avoid release to environmental contamination, suitable containers.
S 60 This material and its container must be disposed of as hazardous waste.

Disposal:
Only empty containers may be recycled. Residual product according to GCU ASN: 080111 (paint and varnish containing organic solvents or other dangerous substances)

Packaging:
10 l in a metal can....................24 cans on a pallet
30 l in a metal can....................10 cans on a pallet

Reference

Note technical rules!

fremdüberwacht   Product ist monitored by third parties!

Back

Necessary information – particularly for the use and the use of our products – please refer our brochures. We are at your personal disposal.