Roof Rehabilitation

durable, decorative and gentrifying

BORNIT® Roof Paint 230

  • short info
  • detailed information
  • Download
  • Reference

short info

BORNIT® Roof Paint 230

Solvent-free, colored roof paint for concrete roofing tiles, fiber-reinforced and asbestos cement slabs, metal sheet roofs and bituminous roof shingles, pure acrylate based. Can be thinned with water, water-tight, bridges hair cracks, gives the roof an attractive look. UV-resistant, vapor permeable  (breathes) and quick drying. Depending on application,  priming with BORNIT® Roof Primer 220 is necessary. Roof inclination at least 3°.

Color: brick red, slate grey, anthracite, brown
other colors on request!

EAN-codeorder-No.Package
brick-red
4 017228 005010

6800000414

10 kg

30 bucket
anthracite
4 017228 005133

6800000415

10 kg

30 bucket
slate-grey
4 017228 004983

6800000554

10 kg

30 bucket
brown
4 017228 005027

6800000555

10 kg

30 bucket
Consumption
each pass approx. 0.25 to 0.30 kg/m²
2 coats necessary!
BORNIT® Roof Paint 230

detailed information

Description 
BORNIT® Roof Paint 230 is a special coating composition on a high quality acryl  dispersion base, which comes in various colours and is designed for painting weathered cement roofing tiles. The product protect roofs against algae and moss development. BORNIT® Roof Paint 230 gives roofs an attractive appearance. It is stable against UV rays, it dries quickly and it is resistant to rain one hour after application. BORNIT® Roof Paint 230 is highly weather resistant.

Uses
As a renovation and rehabilitation coating for inclined roofs made of concrete roof tiles. BORNIT® Roof Paint 230 protects roof coverings from the affects of water and optically improves the roof surface. It is not suitable for painting flat roofs or horizontal surfaces with standing water.

Advantages 
•    weatherproof  for al long time
•    many different colours available
•    prevents algae development
•    beautifies the roof appearance
•    does not contain solvents, is water-soluble
•    economical from the point of view of low tool and application requirements
•    flexible and permeable to water vapour

Produktdaten in Kurzform 
Type Coloured dispersion coating for roofing tiles

Base

acrylic dispersion
Solvents none
Colour classic brick red, shale, and others
Density at 23°C 1.35 g/ cm³
Consistency liquid
Application large and small brush
Painting over 4 – 6 hours
Storage in a dry and cool place, protect from freezing
Storage period 12 months in the closed containers
Cleaning immediately after use with water.
Harmful substances during use none
VbF danger class none
GISBAU-productcode M-GP01

Bases
Bases must be solid, dry, clean, load bearing and free of dust and other contaminants. Old paint, which no longer adheres to the base, must be removed. Where possible, old roof surfaces should be cleaned using pressurised water and thoroughly cleaned and cleared of any loose particles (consult the appropriate guidelines). Extremely damaged tiles or slabs should be replaced.

Application
BORNIT® Roof Paint 230 can be applied by brush, roller or spraying equipment (airless) and it quickly becomes resistant to rain at a temperature of 20°C. Highly absorbent bases must be primed using the roof paint diluted with 10% water or the BORNIT® Roof Primer 220. Then the undiluted paint is applied in two coats. The product can be painted over in 4 – 6 hours at 20°C. The minimum temperature for the material, the base and the atmosphere is +5°C. Do not apply the paint to surfaces under direct sunlight or if the onset of rain threatens.

Consumption
According to the state of the base: about 0.25 to 0.30 litres/m² per coat. Two coats are required. In order to ascertain the exact consumption, carry out a test on a small area.

Storage
Store in a dry and cool place and protect from freezing. The storage period is at least 6 months. Do not heat to over +35°C as this shortens the storage period.

Colours
red, grey, black, blue, green and others

Note
This data sheet replaces and annuls all previous technical information about the product. The information has been compiled according to the state-of-the-art of application technology. However, please note that deviations from the operation method proposed in this data sheet may be necessary depending on the condition of the construction object. Unless agreed otherwise in individual contracts, all of the information contained in the data sheet is non-binding and therefore does not represent the agreed properties and conditions of the product. We reserve the right to make changes to the information contained in this data sheet at any time. We recommend that you take a look at our website www.bornit.de for information concerning any changes.

Entsorgung 
Nur restentleerte Gebinde zum Recycling geben. Materialreste können nach AVV-ASN: 080112 (Farb- und Lackabfälle mit Ausnahme derjenigen, die unter 080111 fallen) entsorgt werden.

Packaging
10 litres in plastic bucket .....30 buckets on a pallet

Reference

Stock Note
 

Back

Necessary information – particularly for the use and the use of our products – please refer our brochures. We are at your personal disposal.