Waterproofing Materials

 

BORNIT® Joint Fabric Tape

  • short info
  • detailed information
  • downloads

short info

BORNIT® Joint Fabric Tape
Flexible sealing tape made of high-quality polyester weave with rubber coating, Sealing of construction and expansion joints, connections, transitions, corners etc., can be used together with sealing systems BORNIT® 1K (Thick Bitumencoating), BORNIT® 2K (Thick Bitumencoating), BORNIT® 2K Flex (Thick Bitumencoating) and BORNIT® Profi 1K Express. Total width: 240 mm; Rubberized width: 150 mm
other dimensions available on request!

Color: white-grey-white

EAN-Codeorder-No.Roll
240 mm !!!NEW!!!
4 017228 009179
6800000798 30m single
fugenflex band 50m 225px

detailed information

Areas of application
BORNIT® Joint Fabric Tape is a supplementary product for waterproofing of buildings with thick bitumen coatings (BORNIT® 1K (Thick Bitumen Coating), 2K (Thick Bitumen Coating), 2K Flex (Thick Bitumen Coating), Repabit, etc.) for flexible and waterproof bridging of building joints. Furthermore, it can be used as an insert in corner and fillet areas at risk for cracks upon laying tiles.

Type and properties
BORNIT® Joint Fabric Tape is a flexible bridging tape for critical areas. It is a polyester fabric with a waterproof rubber coating as its centre strip.

Product advantages
• Air-, steam- and waterproof
• Prevents moisture penetration
• For bridging expansion joints
• Resistant to diluted acids and alkalis
• Universally applicable

Processing
First, the material used for waterproofing of the building is applied right up to joint to be bridged, and then BORNIT® Joint Fabric Tape is immediately applied and fixed fresh on fresh. Following drying of the coating, the same waterproofing material is used once again to cover the edges of the fabric and at least 1 cm of the rubber coating from both sides, so that a continuous waterproofing layer results. Please observe the applicable notes on processing and technical rules for waterproofing of joints when using the various waterproofing materials.

grafik fugenflex band 1 en

grafik fugenflex band 2 en

Product data in brief

Type Polyester fabric with rubber coating (NBR)
Material backing PES – knitted fabrics or nonwovens
Color grau
Overall width 240 mm
Coating width 150 mm
Longitudinal expansion without knitted fabrics at FZmax 44,2 %
Longitudinal expansion with knitted fabrics at FZmax 60,3 %
Maximum longitudinal tensile force at +23 °C 67,3 N/15 mm
Maximum transverse tensile force at +23 °C    53,9 N/15 mm


Health and fire protection, occupational safety
For information on handling, safety and ecology, please refer to the current safety datasheet.

Forms of delivery
30 rm    roles    ………………………………………..…..    1 Role per box
……………………………………………………………    120 roles per pallet

Note on disposal
Only recycle completely empty containers. Material residues can be disposed of according to AVV-ASN: 200139 (plastics).

Note
This datasheet replaces any previous technical information about the product. Thus, this information is no longer valid. The details have been compiled according to the latest state of application technology. Please observe, however, that, depending on the state of the construction object, deviations from the method of application suggested in the datasheet may be required. Unless agreed otherwise in individual contracts, any information contained in the datasheet shall be non-binding and thus does not represent an agreed product constitution. We reserve the right to changes in the information contained in this datasheet anytime.


Back

Necessary information – particularly for the use and the use of our products – please refer our brochures. We are at your personal disposal.