Waterproofing Materials

 

BORNIT® Stick Emulsion

  • short info
  • detailed information
  • downloads
  • reference

short info

BORNIT® Stick Emulsion
Watery, plasticizer-free dispersion for modifying mortar compounds, for making of adhesive bridges, adhesive abd patching mortar, waterproof plasters, waterproof screedings, adhesion enhancing additive for BORNIT® Slurry SF for waterproofing with BORNIT® Profi Hybrid 2K.

Color: white

EAN-Codeorder-No.Package
4 017228 002743 6700000107 1 kg single
4 017228 004587 6800000356 10 kg 60 canister
Consumption
depending on application
BORNIT® Stick Emulsion - 10 kg

detailed information

Areas of application
In connection with cement and sand, BORNIT® Stick Emulsion serves producing bonding bridges between mineral construction materials, such as masonry, plaster, concrete and screed. Furthermore, using BORNIT® Stick Emulsion, mineral construction materials can be made more flexible, their water absorption can be reduced, their resistance to frost and de-icing salt and their resilience to aggressive substances can be improved, as well as the formation of shrinkage cracks reduced. Adding BORNIT® Stick Emulsion to BORNIT® Slurry SF achieves product flexibilisation, smoother processing and better adhesion to the substrate.
BORNIT® Stick Emulsion serves as a primer (diluted with water up to 1:1) for pre-treatment of the substrate for waterproofing with BORNIT® Profi Hybrid 2K.

Type and properties
BORNIT® Stick Emulsion is a universally applicable, aqueous, plasticiser- and solvent-free dispersion based on butadiene-styrene latex for modifying cement-containing mortar compounds, plasters and slurries.
Furthermore, BORNIT® Stick Emulsion can be used as a primer for waterproofing with BORNIT® Profi Hybrid 2K. Due to its non-ionic stabilisation, the product is compatible with all common standard cements.

Product advantages
• Fast drying, so there is no delay in subsequent work
• solvent-free and environmentally friendly
• Universally applicable, therefore a wide range of possible uses

Substrate
The substrate must be clean, stable and free from separating substances. Remove dust, contaminations, loose particles and standing water prior to processing.

Processing
As a primer for BORNIT® Profi Hybrid 2K:
Apply BORNIT® Stick Emulsion diluted with water up to 1:1 using a large or small brush or a roller. After drying of the stick emulsion – drying time at +20°C approx. 3 hours - BORNIT® Profi Hybrid 2K can be applied.

As an additive to BORNIT® Slurry SF, mortars, plasters and concrete:
Add 10 to 20 % of BORNIT® Stick Emulsion to the mixing water. Mortar and concrete must be prepared with a plastic consistency according to applicable DIN regulations.

For cement-based bonding bridges:
Mix BORNIT® Stick Emulsion with water 1:2, stir into a slurry with a cement/sand mixture (1:2) and apply with a firm or broad brush. Apply plaster and screed whilst the slurry is still wet. As a cement-based bonding bridge for waterproofing materials, a drying period of at least 24 hours is required.

Consumption
As a primer and as a cement-based bonding bridge approx. 200 g/m²,
as an additive: approx. 25-50 g per kg of slurry, 15-30 g per kg of mortar

Product data in brief
Type aqueous polymer dispersion
Basic butadiene-styrene latex
Colour milky white
Density at +20°C 1,0 g/cm³
Consistency liquid
Dry substance content 44 +/-1%
pH value 10,5 bis 11,5
Viscosity 150 mPas
Elongation at break 700 %
Storage cool but frost-free
Shelf-life 2 years
Cleaning immediately after use with water
Substances hazardous to health in terms of the ordinance on hazardous materials none
Hazard class according to VbF and ADR none
GISBAU product code GE 0

Storage
In closed containers, cool, but frost-free, the product can be stored for approx. 2 years. Firmly re-seal opened containers. The latex has a slight tendency to creaming, therefore, after longer storage, it should be stirred up prior to use. The upper storage temperature should not exceed +35°C.

Health and fire protection, occupational safety
For information on handling, safety and ecology, please refer to the current safety datasheet.

Forms of delivery
10 kg    Plastic canister    …………………………………………    60 containers per pallet
 1 kg    Can     …………………………………………    Individually

Note on disposal
Only empty containers for recycling. Material residues can be disposed of in accordance with AVV-ASN: 070208 * (other reaction and distillation residues).

reference

Stock Note
 


Back

Necessary information – particularly for the use and the use of our products – please refer our brochures. We are at your personal disposal.