Waterproofing Materials


BORNIT® Bitumen Coating

  • Quick facts
  • Detailed information
  • Downloads
  • Hints

quick facts

BORNIT® Bitumen Coating
Unfilled bituminous coat for protecting concrete surfaces, masonry and foundations against ground dampness, brush-on and spray-on, worked cold, contains solvent, compliant with AIB.

Color: black

4 017228 003979
4 017228 003986
4 017228 003993
4 017228 004006
5 liters
10 liters
25 liters
200 liters
75 pails
45 pails
18 buckets
2 barrels
approx. 0.4 liter/m² for 1 passdepending onsubstrate
BORNIT® Bitumen Coating - 10 liters

detailed information

Product describtion
BORNIT® Bitumen Coating is a solvent based  brush- and sprayable unfilled coating material based upon bitumen. BORNIT® Bitumen Coating is Certificated by the Dresden Testing Institute for Construction Materials according to AIB.

Area of application 
BORNIT® Bitumen Coating is a bitumen solution, which penetrates well into the base and which is used for the optimum hydro-bitumen of surfaces under the level of the terrain against ground dampness.
BORNIT® Bitumen Coating has good gripping properties on all bases, which are commonly used in buildings, such as concrete, bricks or plaster.  In order to improve the gripping properties on concrete, masonry or plaster, BORNIT® Bitumen Bonding Primer may be used as a bonding primer. BORNIT® Bitumen Coating also has a good adhesion to wood and metal.
BORNIT® Bitumen Coating is unsuitable for the application to expanded and extruded polystyrene.

Product advantages
• good coverage properties even after the first coat
• easy application, because the product is ready to use
• universal use on a whole range of bases
• good gripping qualities
• economical from the point of view of low tool and application requirements

Technical data
Type Unfilled bitumen coat
Base bitumen, solvent
Solvent testbenzin
Colour black
Film-forming substances about 60%
Density at 20°C 0.91-0.93 g/cm³
Consistency liquid
Application large and small brush,roller, sprayer
Drying time 6-8 hours at 20°C
Temperature during use minimum +5°C – not susceptible to frost
Storage period in the original, closed containers at least 6 months
Cleaning BORNIT® Bitumen stain cleaner
Harmful substances during work When working in an enclosed area, ensure that there is sufficient ventilation!
According to Industrial Safety Ordinance GISBAU-Productcode BBP 30
VOC-concentration < 350 g/l

All bases must be clean and dry and they must not be greasy. Any missing sections, damaged concrete and areas on monolithic floor finish, cracks and scabbing must be repaired.
BORNIT® Bitumen Coating has good gripping properties on all bases, which are commonly found on buildings. BORNIT® Bitumen Bonding Primer is used as the bonding primer.

BORNIT® Bitumen Coating can be processed at normal temperature without heating and dilution. The processing temperature (ambient and substrate temperature) should not fall below +5°C and above +35°C. Store in cold weather before processing at room temperature. BORNIT® Bitumen Coating is applied with a brush or swab to the ground. Recommended painting series: one coat of primer with BORNIT® Bonding Primer and two top coats with BORNIT® Bitumen Coating.

About 0.4 litres/m² per coat

The storage period is 6 months. The product is not sensitive to frost!

Health protection during work and fire protection 
Keep out of the reach of children. Do not eat, drink or smoke while working. When working ensure that there is sufficient ventilation!  Pay Attention to the actual version of TRGS.
Do not use in enclosed areas! Only in liquid state flammable and dangerous to the environment. Keep away from fire. After evaporation of the solvent, there is no more danger for the environment.
The bitumen-film is not hazardous for human, as well as the environment.

Waste disposal 
Only empty containers may be disposed of. Product waste is disposed of according to guideline AVV-ASN:. 080409* (glues and bitumen materials, which contain organic solvents or other dangerous materials).

Method of delivery 
    5 l container....................75 containers on a pallet
  10 l container....................45 containers on a pallet
  25 l plastic bucket....................18 buckets on a pallet
200 l barrel


Note technical rules!


Necessary information – particularly for the use and the use of our products – please refer our brochures. We are at your personal disposal.